Three major precautions when using servo motor cables

Previously, the editor has introduced in detail the basic inspection standards for purchasing servo motor cables. It can be seen that when purchasing cables, you must check in advance whether the relevant merchants or sellers have all the product certificates and other relevant information, and also It is necessary to inspect the outer packaging of the product and conduct flame retardant tests on the cables. So what are the three major precautions when using servo motor cables? Let’s discuss it together below!

With the continuous development of my country's manufacturing industry, servo motors have gradually become precision components for controlling motors, which have a large market demand. As the main signal transmission tool for servo motors, servo motor cables have also been widely used.

By placing this kind of cable in the drag chain system, it can move back and forth, thereby effectively providing corresponding services to the equipment. However, during installation and use, in order to ensure its performance and minimize wear and tear, it is necessary to Note the following.

1. First of all, since the cable is installed in a unit where the equipment needs to move back and forth, or in a situation where the equipment is fixedly installed, it is used to transmit signals and data. Therefore, the servo motor needs to be strictly protected from water and oil to ensure reliable operation of the cable. Provide a good environment.

Whether it is the motor itself or the cable, although its shell has waterproof and oil-proof properties, it still cannot withstand a large amount of water and oil. Therefore, do not completely immerse them in water or place them in an environment exposed to oil. In addition, when the motor is connected to a reduction gear, an oil seal should be added before using the motor to prevent oil in the gear from entering the motor or cable.

2. Secondly, the bending radius of the cable should be as high as possible. At the same time, during the installation and use process, the relevant operators must fully understand the bending radius of the cable, so that the operation must not exceed the value.

During use, it is necessary to reduce the stress on the cable as much as possible, especially at the connection or outlet of the cable. It must be ensured that the cable will not produce a moment due to bending pressure from the outside, or receive vertical compliance from its own weight. And cause breakage and damage.

3. If you need to move the servo motor, you need to firmly fix the cable connected to the motor configuration to a stationary part relative to the motor, and use additional wires in the cable holder to extend the cable to ensure The cable does not have to bend too much when the motor is moving, thus greatly ensuring the complete reliability of the cable.

Servo motor cable has insulation and shielding properties, which makes its transmission performance . However, in order to give full play to its advantages and provide efficient transmission services to the motor, operators must follow relevant rules and regulations during installation and use, so that while greatly improving its performance, it can also effectively extend the motor's performance. service life and bring benefits to all sectors of industry.